Car mud groove
Still deciding? Contact us!
Category:
Keywords:
hot runner
cold runner
- Product description
-
Molded part: Automotive mudguard 1
Plastic: TPE
System: 25VE
Note: The 2-point needle valve directs cold runner injection.
Precautions before mold opening:
1. Accurately pinpoint the location in mold flow analysis.
2. Size of the flow channel and sprue
3. Properly plan the weld lines and venting locations.
4. Balanced control of hot runner glue output
Adjust the size of the runners and gates through mold flow analysis.
1. Achieve precise control over the amount of adhesive dispensed.
2. Ensures that the adhesive and sealing strip bond together without excess material.
3. Precise control of temperature, time, and adhesive amount ensures that the joint is less likely to come loose.
Consult now
If you have any questions, please leave us a message—we’d be happy to assist you.
Recommended Products
Sample part: SA6 triangular window Material: EPDM Cold runner: Needle-valve cold runner Mold cavity: 1 cavity, 1 part per mold
Sample part: SC3E triangular window Material: EPDM Cold runner: Needle-valve cold runner Mold cavity: 1 cavity, 1 part per cavity
European-style guide groove HC2
Sample part: European-style guide groove HC2 Material: EPDM Cold runner: Needle-valve cold runner Mold cavity count: 2 cavities, 2 parts per mold
Sample part: Internal water seal Material: EPDM Cold runner: Needle-valve cold runner Mold cavity: 1 cavity, 1 part per cavity