Contact Us
Shenzhen factory
Address: No. 48, Hongxing Hebin South Road, Songgang Subdistrict, Bao'an District, Shenzhen City
Phone:15816813970
Email:Domi@yusotec.com
Ningbo Factory
Address: No. 3 Malang Highway, Mazhu Town, Yuyao City, Zhejiang Province
Phone:15816813970
Email:Domi@yusotec.com
Shanghai Sales Center
Address: No. 43, Lane 118, Yonghexing Road, Shanghai市
Phone:15816813970
Email:Domi@yusotec.com
Car
- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
Molded part: Car spoiler Plastic: PP System: 35VE Description: Four-point gating with cylinder-controlled valve needles for delayed injection, which reduces or eliminates weld lines and improves appearance quality.
Molded part: Automotive side-window trim Plastic: PVC Hot runner: 25OA Description: Uses a 3-point balanced hot runner system to control the weld line and pressure, preventing overpressure that could cause glass breakage.
Molded part: Automotive headlight System: 25OA Description: Four-point gating to ensure balanced flow, control weld lines and pressure, and prevent overpressure-induced glass breakage.
Molded part: Automotive side-window trim Plastic: PVC Hot runner: 25OA Description: Uses a two-point hot runner system for gate placement, effectively controlling the weld line and pressure to prevent overpressure from causing glass breakage.
Car corner window – Shenlong C84
Molded part: Automotive corner window – Shenlong C84 Plastic material: TPE System: 25OA Description: Two-point gating to ensure balanced flow, control weld lines and pressure, and prevent overpressure that could cause glass breakage.
Car corner window – Geely VF11
Molded part: Automotive corner window—Geely VF11 Plastic material: PVC Description: Uses 6-point gating Issues: The product is prone to defects such as weld lines, bright spots, flow marks, material streaks, sink marks, and others. Solutions: 1. Ensure precise mold flow analysis and clearly communicate the gate locations in advance. 2. Add vents at areas along the mold flow front where temperatures are excessively high. 3. During actual production, carefully control the material temperature.
Molded part: Automotive corner window – GAC A064 Plastic: PVC System: 25OA Description: Five-point gating system to ensure balanced flow, control weld lines and pressure, and prevent overpressure-induced glass breakage.
Molded part: Automotive corner window – SV5103 Plastic: PVC Hot runner: 25OA Description: Uses a 3-point balanced hot runner system to control the weld line and pressure, preventing overpressure that could cause glass breakage.
Car corner window - A39 (Xinyi)
Molded part: Automotive corner window—A39 (Xinyi) Plastic: PVC System: 25OA Description: 1+1 gating arrangement, 4 sprue points, and flow balance control. Mold Flow Analysis: Before mold opening, use mold flow analysis to accurately identify gate locations, ensure flow balance, determine the positions of vents and weld lines, and avoid the need for post-molding modifications.