Contact Us
Shenzhen factory
Address: No. 48, Hongxing Hebin South Road, Songgang Subdistrict, Bao'an District, Shenzhen City
Phone:15816813970
Email:Domi@yusotec.com
Ningbo Factory
Address: No. 3 Malang Highway, Mazhu Town, Yuyao City, Zhejiang Province
Phone:15816813970
Email:Domi@yusotec.com
Shanghai Sales Center
Address: No. 43, Lane 118, Yonghexing Road, Shanghai市
Phone:15816813970
Email:Domi@yusotec.com
Product Center
- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
Molded part: Hood trim strip (R33) Plastic: ABS System: 35VE Description: This design features an integrated three-point needle valve hot runner system. The product is injected sequentially via control of the valve needle, which helps eliminate weld lines and significantly improves the aesthetic quality of electroplated parts.
Molded part: Tailgate trim strip (TX3) Plastic: ABS System: 35VE Description: This design features an integrated three-point needle valve hot runner system. The product is injected sequentially via control of the valve needle, which helps eliminate weld lines and significantly improves the appearance quality of electroplated parts.
Molded part: C-pillar exterior trim Plastic: PP System: Hot runner Description: Single-point gating with a hot nozzle designed to prevent stringing and ensure consistent gate temperature.
Molded part: B-pillar exterior trim Plastic: PP System: Through-gate Description: By means of mold flow analysis and spot control, product deformation is kept within a controllable range.
Molded part: Medical Petri Dish Plastic: GPPS Hot Runner: Through-Runner Number of Cavities: 2+2
Molded part: Medical Petri dish Plastic: PP Hot runner: Needle nozzle Number of cavities: 4, 8
Molded part: Needle cover Plastic: PP Hot nozzle: Sharp nozzle Molding count: 64, 128
Molded part: Medical tubing preform Plastic: PP Hot runner nozzle: Needle valve nozzle Number of cavities: 32, 48
Molded part: PP test tube Plastic: PP Hot runner nozzle: Needle valve nozzle Number of cavities: 12, 16, 24, 32
Molded part: Medicine cup Plastic: PP (t=0.4mm) Hot runner: Needle valve nozzle Number of cavities: 32
Molded part: Standard bottle cap Plastic: PP Hot runner: Needle nozzle Number of cavities: 24, 32, 48
Molded part: Flip-top cap Plastic: PP Hot runner: Needle nozzle Molding cavity count: 12, 16