Contact Us
Shenzhen factory
Address: No. 48, Hongxing Hebin South Road, Songgang Subdistrict, Bao'an District, Shenzhen City
Phone:15816813970
Email:Domi@yusotec.com
Ningbo Factory
Address: No. 3 Malang Highway, Mazhu Town, Yuyao City, Zhejiang Province
Phone:15816813970
Email:Domi@yusotec.com
Shanghai Sales Center
Address: No. 43, Lane 118, Yonghexing Road, Shanghai市
Phone:15816813970
Email:Domi@yusotec.com
Hot runner
- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
Molded part: Automotive corner window – SV5103 Plastic: PVC Hot runner: 25OA Description: Uses a 3-point balanced hot runner system to control the weld line and pressure, preventing overpressure that could cause glass breakage.
Car corner window - A39 (Xinyi)
Molded part: Automotive corner window—A39 (Xinyi) Plastic: PVC System: 25OA Description: 1+1 gating arrangement, 4 sprue points, and flow balance control. Mold Flow Analysis: Before mold opening, use mold flow analysis to accurately identify gate locations, ensure flow balance, determine the positions of vents and weld lines, and avoid the need for post-molding modifications.
Molded part: Hood trim strip (R33) Plastic: ABS System: 35VE Description: This design features an integrated three-point needle valve hot runner system. The product is injected sequentially via control of the valve needle, which helps eliminate weld lines and significantly improves the aesthetic quality of electroplated parts.
Molded part: Tailgate trim strip (TX3) Plastic: ABS System: 35VE Description: This design features an integrated three-point needle valve hot runner system. The product is injected sequentially via control of the valve needle, which helps eliminate weld lines and significantly improves the appearance quality of electroplated parts.
Molded part: C-pillar exterior trim Plastic: PP System: Hot runner Description: Single-point gating with a hot nozzle designed to prevent stringing and ensure consistent gate temperature.
Molded part: B-pillar exterior trim Plastic: PP System: Through-gate Description: By means of mold flow analysis and spot control, product deformation is kept within a controllable range.
Molded part: Medical Petri Dish Plastic: GPPS Hot Runner: Through-Runner Number of Cavities: 2+2